Simulation of 300 101 route latest exam materials and bootcamp for Cisco certification for candidates, Real Success Guaranteed with Updated ccnp routing and switching route 300 101 pdf dumps vce Materials. 100% PASS ROUTE Implementing Cisco IP Routing exam Today!
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 300-101 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 300-101 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/300-101-exam-dumps.html
P.S. Simulation 300-101 bootcamp are available on Google Drive, GET MORE: https://drive.google.com/open?id=1IPFRgHPm2o-6qCPBhQuk3ypuFkiGdV3b
New Cisco 300-101 Exam Dumps Collection (Question 10 - Question 19)
Q10. An IPv6 overlay tunnel is required to communicate with isolated IPv6 networks across an IPv4 infrastructure. There are currently five IPv6 overlay tunnel types. Which three IPv6 overlay tunnel statements are true? (Choose three.)
A. Overlay tunnels can only be configured between border routers capable of supporting IPv4 and IPv6.
B. Overlay tunnels can be configured between border routers or between a border router and a host capable of supporting IPv4 and IPv6.
C. Cisco IOS supports manual, generic, routing encapsulation (GRE), IPv6-compatible, 4to6, and multiprotocol Label Switching (MPLS) Overlay tunneling mechanism.
D. Cisco IOS supports manual, generic routing encapsulation (GRE), IPv4-compatible, 6to4, and Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) overlay tunneling mechanisms.
E. A manual overlay tunnel supports point-to-multipoint tunnels capable of carrying IPv6 and Connectionless Network Service (CLNS) packets.
F. Overlay tunneling encapsulates IPv6 packets in IPv4 packets for delivery across an IPv4 infrastructure.
Answer: B,D,F
Explanation:
B:Overlay tunnels can be configured between border routers or between a border router and a host capable of supporting IPv4 and IPv6.
D: Cisco IOS supports manual, generic routing encapsulation (GRE), IPv4-compatible, 6to4, and Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) overlay tunneling mechanisms.
F:Overlay tunneling encapsulates IPv6 packets in IPv4 packets for delivery across an IPv4 infrastructure.
Q11. A policy needs to be implemented on Router B so that any traffic sourced from 172.16.10.0/24 will be forwarded to Router C.
Which configuration on Router B will achieve the desired effect?
A. access-list 1 permit 172.16.10.0 0.0.0.255!interface s0ip policy route-map policy!route-
map policy permit 10match ip address 1set ip next-hop 172.16.12.3
B. access-list 1 permit 172.16.10.0 0.0.0.255!interface e0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.12.2
C. access-list 1 permit 172.16.10.0 0.0.0.255!interface e0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.14.4
D. access-list 1 deny 172.16.10.0 0.0.0.255!interface s0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.12.2
Answer: A
Explanation:
The u201cnext-hopu201d IP address should be the E1 interface of router C (172.16.12.3).
Q12. Which of the following are characteristics of TACACS+? (Choose two.)
A. Uses UDP
B. Encrypts an entire packet
C. Offers robust accounting
D. Cisco-proprietary
Answer: B,D
Explanation: EXPLANATION/REFRENCE CHARACTERISTICS O TACACS+
1-TACACS+ encrypts the entire body of the packet 2- TACACS+ uses TCP
3-TACACS+ uses the AAA architecture, which separates AAA 4-TACACS+ offers multiprotocol support.
5- TACACS+ is Cisco proprietary protocol
6- TACACS+ is a heavy-weight protocol consuming more resources 7-TACACS+ uses TCP port 49
8-Mainly used for Device Administration 9-TACACS+ supports 15 privilege levels
http://www.cisco.com/c/en/us/support/docs/security-vpn/remote-authentication-dial-user-service-radius/13838-10.html7
Q13. A network engineer is disabling split horizon on a point-to-multipoint interface that is running RIPng. Under which configuration mode can split horizon be disabled?
A. router(config-riping)#
B. router(config-rtr)#
C. router(config-if)#
D. router(config)#
Answer: D
Q14. Refer to the exhibit.
Which command would verify if PBR reacts to packets sourced from 172.16.0.0/16?
A. show ip route
B. show policy-map
C. show access-lists
D. show route-map
Answer: D
Explanation:
The u201cshow route-map u201croute-map nameu201d displays the policy routing match counts so we can learn if PBR reacts to packets sourced from 172.16.0.0/16 or not.
Q15. Which command do you enter to display log messages with a timestamp that includes the length of time since the device was last rebooted?
A. service timestamps log uptime
B. logging facility 20
C. service timestamps debugging localtime msec
D. logging console errors
E. logging monitor 7
F. service timestamps log datetime msec
Answer: A
Q16. What is the purpose of the route-target command?
A. It extends the IP address to identify which VRF instance it belongs to.
B. It enables multicast distribution for VRF-Lite setups to enhance IGP routing protocol capabilities.
C. It manages the import and export of routes between two or more VRF instances.
D. It enables multicast distribution for VRF-Lite setups to enhance EGP routing protocol capabilities.
Answer: C
Q17. Refer to the exhibit.
Given the partial configuration in the exhibit, which IPv6 statement is true?
A. The configuration is an example of an encrypted IPv6 VPN tunnel.
B. The configuration is an example of a one to one IPv6 tunnel.
C. The configuration is an example of a 6to4 tunnel.
D. The configuration is an example of a 4to6 tunnel.
Answer: C
Q18. Which NetFlow component is applied to an interface and collects information about flows?
A. flow monitor
B. flow exporter
C. flow sampler
D. flow collector
Answer: A
Q19. A network engineer is investigating the cause of a service disruption on a network segment and executes the debug condition interface fastethernet f0/0 command. In which situation is the debugging output generated?
A. when packets on the interface are received and the interface is operational
B. when packets on the interface are received and logging buffered is enabled
C. when packets on the interface are received and forwarded to a configured syslog server
D. when packets on the interface are received and the interface is shut down
Answer: A
P.S. Easily pass 300-101 Exam with 2passeasy Simulation Dumps & pdf vce, Try Free: https://www.2passeasy.com/dumps/300-101/ (487 New Questions)